TIS techstream
TIS Techstream 2.0
TIS Techstream 2.0 TIS techstream
The Techstream 2.0 was the Toyota/Scion/Lexus factory scantool from late 2013 to mid-2019, and has been replaced by the Techstream ADVi, our next generation scantool.

For additional information on Techstream ADVi please click here.

Scantool Diagnostics
Techstream 2.0 is supported and replacement parts are available from Toyota. Techstream 2.0 offers full support for 1996 – current vehicles* marketed in North America. Periodic software updates will be available to support new models.

Vehicle Reprogramming
Toyota/Lexus/Scion ECMs can be reprogrammed using the Techstream 2.0 scantool. Techstream 2.0 software version requirements are specified in applicable Technical Service Bulletins (TSBs), which can be accessed with a subscription to this website. Techstream 2.0 can be used for 1996 – current Toyota*/Scion/Lexus vehicles marketed in North America.

>>Return To "Scantools & Vehicle Reprogramming"

*2020 Toyota GR Supra requires an additional diagnostic cable and Windows 10 operating system.

Important Notice
PCM Reprogramming

It is possible to permanently damage a vehicle controller during the flash reprogramming process. It is especially important to understand that once started, the reprogramming process must not be interrupted, reprogramming devices must not be disconnected and PCs must not be allowed to go into Standby, hibernation or similar power management modes. The information provided herein is intended expressly for use by qualified professional automobile technicians. To prevent damage to your customer's vehicle and ensure safe service practice, read these materials completely and thoroughly before servicing the vehicle and be sure to follow all instructions.

>>Top Of Page